Bang & Olufsen BeoVision Avant - User Guide User Manual
Page 77
77
You can integrate external equipment with
your television to listen to music from an
audio system or another television.
You can listen to audio and video sources
from another Bang & Olufsen product, if the
product is connected to the same network
(router) as your television. When
connecting to an audio system with Master
Link, a BeoLink Converter NL/ML is required
to act as a ‘bridge’ between Network Link
and Master Link.
.
A source can play simultaneously on speakers
in different rooms.
The television (with additional speakers) and
an audio system is set up in one room and an
audio system is set up in another room:
– LINK TO OTHER PRODUCTS: the audio
system in the same room and BLC
– Use television speakers for the audio
system in the same room: YES
– Audio system in the other room: Option 2
In the PRODUCT INTEGRATION menu, you
can select up to two products to link to. A list
of products identified on the home network
is shown.
To link to sources from products, such as
radio or CD, you must set up the products in
the LINK TO OTHER PRODUCTS menu by
pressing the
red button. To select a product,
it must be switched on for it to show up as a
product found in the list. If you have selected
two products, you set one product to be the
primary product in order for its sources to be
shown immediately after the television
sources in the SOURCE LIST. If you have an
audio product in the same room as your
television, it can be set up to use the
television speakers.
When you have chosen a product once in the
LINK TO OTHER PRODUCTS menu, the
sources that can be linked to are shown in
the SOURCE LIST with a ‘link’ symbol ( )
and an indication of the product.
For information about connecting an audio
system or a television for integration with
your television,
.
When the television is part of a system setup,
it will automatically set WAKE ON LAN/
WLAN to ON to be able to switch on
connected equipment. Note that this will
increase the power consumption slightly.
When a BeoLink Converter NL/ML is a part
of your system, six audio sources are listed
as sources you can link to, whether or not
equipment is connected to these sources.
Sources that are not used can be hidden
from the SOURCE LIST in the SOURCE LIST
menu.
You can also bring up the LINK TO OTHER
PRODUCTS menu from the SOURCE LIST by
pressing the
yellow button.
To see linked sources in the remote control
display, see the guide for BeoRemote One.
>> Distribute sound with Network Link
Integrate additional equipment
Option 2
BLC
MENU
SETUP
PRODUCT INTEGRATION
LINK TO OTHER PRODUCTS