Operate two televisions with one remote control – Bang & Olufsen BeoVision Avant - User Guide User Manual
Page 82
82
If you have two Bang & Olufsen
televisions, and commands from
your remote control can be
received by both televisions, you
must change between the two
televisions via LIST.
Connection via a BeoLink
Converter NL/ML is required if
one of your televisions is
equipped with Master Link,
.
One remote control for both televisions
For your television to function properly, it is
essential that the television is set up to a
product. See also the guide for your remote
control.
BeoRemote One – Switch between the two
televisions…
Normally, you can activate a source, such as
TV, by pressing TV or MUSIC and finding
the relevant source on your remote control.
However, when you have two televisions,
you must select a television before you can
operate its sources:
Press to bring up the current
product, such as
BeoVision, in
the BeoRemote One list
Select the desired product, for
example,
BeoVision(2) for a
Network Link television or
Beo4
LINK for a Master Link television
Press and select a source, such
as
YOUTUBE
It is also possible to rename the products in
the BeoRemote One display, see the guide for
your remote control. For information about
choice of product, contact your retailer.
Operate two televisions with one remote control
LIST
...
...
TV
TV
LIST
BeoVision(2)
BeoVision
TV
YOUTUBE
LIST
BeoVision
BeoVision(2)
TV
YOUTUBE
LIST
Beo4 LINK
BeoVision
TV
YOUTUBE
LIST
BeoVision
Beo4 LINK
TV
YOUTUBE
Example of remote control operation when
you switch from one television with Network
Link to another.
Example of remote control operation
when you switch between a television with
Network Link and a television with Master Link.
BeoVision 2
B
eo
V
isio
n
Beo4 LINK
B
eo
V
isio
n