Epson Epson - Manual (Page 134)

6. Now locate one of the power supply cables that lead from the
power supply. (They have multi-colored wires and a plastic
connector on the end.) Align the notched corners of the
cable’s connector and the drive’s power connector; then
push in the cable connector.
N o t e
Your system includes five power supply cables; three
with full-size connectors and two with smaller
connectors. If you need more than these five connectors,
you can purchase Y-adapters for power supply cables at
most computer accessory stores. A Y-adapter allows you
to use one connector for two devices.
Installing and Removing Tower Drives
6 - 1 3