Epson Epson - Manual (Page 50)

Running the lnstallation Program
Follow these steps to install the PCI IDE drivers:
1. Insert the PCI IDE Drivers diskette in drive A.
2. Access the DOS prompt, if you are not there already
3 . T y p e A : and press Enter to log onto drive A.
4. Type
I N S T A L L
and press Enter.
5. Follow the instructions on the screen to install the PCI IDE
drivers on your hard disk.
N o t e
Not all hard disk drives can take full advantage of the PCI
IDE interface. To take advantage of this feature, your hard
disk drive must support the ATA-2 standard and a 32-bit
data path. If the drive is larger than 528MB, it also must
support LBA. If you need information on your hard disk
drive, see the hardware specifications for the drive or
contact the drive manufacturer and request a product
specification.
2-20 Running SETUP and Installing Drivers