Epson Epson User Manual
Page 85
Installing a Card in the Slimline Computer (3-slot Side)
The option card connector board in the slimline computer has
two slots on one side and three slots on the other side.
Although the illustration shows an ISA card, you can use the
same instructions for installing a PCI card.
Follow these steps to install an option card on the three-slot
side:
1.
Remove the retaining screw securing the option slot cover
to the computer, as shown below. (Keep the screw to secure
the option card to the computer.)
2.
Slide out the slot cover and set it aside. (Store it in a safe
place in case you remove the option card later.)
3.
Hold the card along the top corners and guide it into the slot,
as shown below. (If you are installing a full-length card
insert the front edge of the card into the corresponding
guide inside the computer’s front panel.)
4-22
Installing and Removing Options