Epson Epson - Manual (Page 42)

Setting the Boot Options
When you select Boot Options from the Main Menu, you
see the Boot Options screen, which allows you to define the
drive boot sequence and determine which power-on diagnostic
tests the computer performs when you start your system.
The Boot sequence option determines the order in which
the computer checks the drives for an operating system when
you turn it on or reset it. The table below describes the
available options.
Boot sequence option settings
* Default setting
The Floppy check option allows you to speed up the boot
process by disabling power-on diagnostic checking of the
diskette drive type. The default setting for this option is
Enabled; however, you should select Disabled if you set
the Boot sequence option to C: only.
If you set the Boot sequence option to C-
will not be able to start your system when there is a problem
2 - 1 2 Running SETUP and Installing Drivers