Epson Epson - Manual (Page 83)

5. If you are inserting different SIMMs, follow the instructions
under “Inserting SIMMs” to install them.
6. Replace any option cards you removed, as described under
“Installing an Option Card.”
7. Replace the computer’s cover as described under “Replacing
the Cover. “Then see “Post-installation Procedures” for
instructions on configuring your computer with your new
memory size.
Installing an Option Card
This section explains how to install option cards in your
computer. Your computer has five slots; the three large slots
are ISA compatible, and two smaller slots are PCI compatible.
Note
The two PCI slots are identified as PCI1 and PCI2 on the
option slot connector card. The computer’s SETUP program
refers to the slot number as it configures PCI cards, so note
the slot you use for each card you install.
The slot nearest the system board accommodates only a
half-length card. On the slimline computer, the slots facing the
power supply also accommodate only half-length cards.
Caution
Before you install any option cards in your system, make
sure that each card does not draw more current than the
limits listed in Appendix A.
4-20 Installing and Removing Options