Epson Epson - Manual (Page 82)

Removing SlMMs
If you need to remove SIMMs from your computer (to install
different ones, for example), follow the steps below:
1. Use the illustration under “Locating the Internal
Components” to locate the SIMM sockets in the corner of
the main system board.
2. Remove any option cards that may be blocking your access
to the SIMM sockets. (See “Removing an Option Card” for
instructions.)
3. Use your fingers or a small screwdriver to carefully pull
away the tabs that secure the SIMM at each end, as shown
below. The SIMM falls to the side; remove it from the
socket.
4. Follow the same procedure to remove any other SIMMs.
Installing and Removing Options
4 - 1 9