Inserting and removing diskettes – Epson Epson User Manual

Page 59

Advertising
background image

To resume activity when your system is in a power-saving
mode, press a key or move the mouse. If your system was in
Doze mode, the monitor immediately displays and you can
access your system right away.

If your system was in Suspend mode, it takes a few moments
for the monitor to display and for the hard disk drive to return to

active mode. You'll hear it start again. It takes a few seconds for the

drive to reach its full operating speed and read or write to the disk

Note

Some hard disk drives do not support low-power modes.
Also, the delay caused by the hard disk drive returning to
active mode may cause errors in some applications. If you

have problems, you may want to disable the standby timer

for the hard disk drive.

Inserting and Removing Diskettes

To insert a diskette into a 35inch drive, hold the diskette with

the label facing up and the shutter leading into the drive, as
shown in the following illustrations. Slide the diskette into the

drive until it clicks into place.

3-8

Using Your Computer

Advertising