Epson Epson User Manual
Page 86
Once the connectors reach the slot, push the card in firmly
(but carefully) to insert it fully. You should feel the card fit
into place. If it does not go in smoothly, do not force it; pull
the card all the way out and try again.
4.
Secure the end of the card to the computer with the retaining
screw.
Installing a Card in the Slimline Computer (2-slot Side)
The option card
connector
board in the slimline computer has
two slots on one side and three slots on the other side.
Follow these steps to install an option card on the two-slot side:
1. Remove the retaining screw securing the slot cover bracket.
Remove the bracket by lifting it straight up and out of the
small metal holder at the bottom.
2. Remove the slot cover for the slot you are going to use.
Installing
and Removing Options
4-23