Epson Epson - Manual (Page 76)

To move a jumper from one position to another, use
needle-nose pliers or tweezers to pull it off its pins and
gently move it to the desired position.
Caution
Be careful not to bend the jumper pins or damage any
components on the main system board.
4. Replace any option cards you removed, if necessary.
See “Installing an Option Card “for instructions.
5. Replace the computer’s cover as described under “Replacing
the Cover.”
Installing Memory Modules (SIMMs)
Your computer comes with 4 or 8MB of memory on a SIMM.
By installing additional SIMMs, you can increase the amount of
memory in your computer up to 128MB.
There are four SIMM sockets on the main system board, and
each can contain one memory module. You can install lMB,
2MB, 4MB, 8MB, 16MB, and 32MB SIMMs. The sockets are
labelled on the main system board.
Installing and Removing Options
4 - 1 3