Epson PhotoPC 3100Z - Manual (Page 16)

Installing and Setting up the Software 16
After you finish installation, go to the next section to
set up EPSON CameraStarter.
Setting Up EPSON CameraStarter
EPSON CameraStarter is a utility that provides you
with a convenient way to launch the EPSON
AutoDownloader and EPSON PhotoQuicker
software. You can then use these software to transfer
files from your memory card to a computer, to print
your images, or to do both in one session.
You can set up EPSON CameraStarter to open
automatically when you connect your camera to your
computer, or when you insert the card into a PC Card
slot. To make these settings, follow the steps below.
Note:
❏
You must use the memory card with your PhotoPC
3100Z before inserting it into a PC Card slot if you
want EPSON CameraStarter to open automatically.
❏ To start CameraStarter automatically when a memory
card is inserted, CardMonitor must be installed. For
instructions on installing CardMonitor, see
“Installing the Software for Windows Users” on page
12 or “Installing the Software for Macintosh Users”
on page 13.
1. Start EPSON CameraStarter.
In Windows
Click Start, point to Programs, then to EPSON
Camera
and then to EPSON Photo!4, then click
EPSON CameraStarter .
On a Macintosh
Double-click the EPSON Photo!4 folder, then
double-click the EPSON CameraStarter icon.
The EPSON CameraStarter dialog box appears.
2. Click the Settings button.
3. To make EPSON CameraStarter open
automatically when you connect a PhotoPC
3100Z containing a memory to your computer, or
when you insert your memory card into your
EPSON printer’s PC Card slot, click the Show
EPSON CameraStarter
button.
If you want CameraStarter to open automatically
when you insert your memory card into a PC
Card slot of a device other than your printer, such
as your computer or a memory card reader, select
the Monitor card insertion into Card Reader
slots
check box.