Epson PhotoPC 3100Z - Manual (Page 20)

Transferring Images to Your Computer 20
Note:
❏
Make sure the camera’s batteries have enough power
whenever connecting the camera to your computer. If
the PhotoPC 3100Z turns off automatically because of
low battery power while connected, your computer
may function improperly. EPSON highly recommends
using the optional AC adapter whenever you connect
the camera to your computer.
❏ When the camera is connected to the computer, you
cannot use the buttons on the camera, and the camera’s
automatic power save feature is disabled.
❏ Although you can connect USB cable at any time,
EPSON recommends connecting it in the manner
described below to secure the connection.
❏ If the EPSON software does not recognize the camera
when it is connected, see the Troubleshooting chapter
in the online EPSON Digital Camera Software User’s
Guide included on your CD-ROM.
To connect the camera, follow the steps below.
1. Turn on your computer.
2. Plug the cable connector into the USB port on your
computer or USB hub.
c
Caution:
Be sure to use the USB cable that comes with
your camera to avoid damaging the camera’s
interface connector.
USB port on
computer
USB cable