Rosen Aviation 19-55 : Remote electronics - Manual (Page 32)

Rosen Aviation Remote Display System
Document Number: 105478 Revision: F
Date: 06/23/14
Template: 4.4.1.6FM2; Revision A; 12/06/12 Page 32 of 38
Table 5 Technical references
Product Part Number Location
Universal Remote Control Contact Rosen Sales for part number availability
55” Bezel Drawing 5501-900
Contact Rosen Technical Support
RS-232 External Controller Message Formats 9002934
Contact Rosen Technical Support
RS-485 Network Message Definitions 9002933
Contact Rosen Technical Support
HD Monitor IR Kit
0500-023
www.rosenaviation.com
Interconnect
Cable Specification for Remote
Electronics
105821
Contact Rosen Technical Support
If you need assistance in configuring a universal remote control to work with a remote display
system, please contact Rosen Aviation Technical Support at 541.342.3802.
11.2. Cleaning the Display
To clean the LCD, very gently wipe the screen with a clean, commercially approved LCD
cleaning cloth and alcohol-free LCD cleaning solution. Use one firm cleaning motion instead of
circular or repeated side-to-side scrubbing.
11.3. RTCA DO-160F Qualifications for Displays
The table below shows the DO160 compliance of the remote display system, unless otherwise
noted. Omitted categories are not applicable to this product or its expected installation.
Table 6 The remote display system is compliant with the following DO 160F test categories
Description Section Category Comments
Temperature and Altitude 4
Ground Survival/Short-Time Operating
Low Temp
4.5.1 A1
Operating Low Temperature 4.5.2 A1
Ground Survival/Short-Time Operating
High Temp
4.5.3 A1
Operating High Temperature 4.5.4 A1
Altitude 4.6.1 A1
Decompression 4.6.2 A1 8,000 – 50,000 ft.
Overpressure 4.6.3 A1
Temperature Variation 5
Temperature Variation 5.3.1 C
Humidity 6
Humidity 6.3.1 A
Operational Shocks & Crash Safety 7
Operational Shocks 7.2.1 B
Crash Safety (Impulse) 7.3.2 B