Subaru Robin RGD3300H - Manual (Page 30)

– 27 –
3 Pipe Frame (1) Remove the fuel tank baffle plate.
6 ø bolts .............................. 2 pcs.
(2) Remove the stoppers.
8 ø bolts .............................. 4 pcs.
10 mm spanner or
box spanner
(3) Remove the filter bracket from the
frame.
8 ø bolts .............................. 2 pcs.
Take care of spilt fuel
from the filter.
(4) Remove the four nuts which join the
mount rubbers to the engine.
12 mm spanner
(5) Remove the two bolts which join the
rear cover to the generator base.
8 ø bolt ................................ 2 pcs.
12 mm spanner
(6) Remove the bolts and nuts to fix the
engine base.
(7) Lift up the engine and alternator
assembly using a chain-block, and dis-
mount it from frame.
(8) Remove generator base from mount
rubber.
8 ø nut................................. 1 pc.
12 mm spanner
(9) Remove mount rubbers from frame. 12 mm spanner
Step Part to remove Description Remarks Tool
GENERATOR_GS2380.fm 27 ページ ２００７年１０月１日 月曜日 午前９時１３分