Subaru Robin RGD3300H - Manual (Page 40)

– 37 –
(4) Mount the GENERATOR BASE on the mount rubber attached to the frame at step (3).
8 ø flange nut ............................. 1 pc.
Tightening torque: 11.8 ~ 13.7 N-m (120 ~ 140 kg-cm, 8.68 ~ 10.1 ft-lb)
(5) Attach the base plate to the engine.
RGD3300H ................................ 8 ø
RGD5000H ................................ 10 ø
(6) Lift engine and alternator assembly with a
chain block and mount it to the frame.
Down the alternator first then the engine into
the frame.
Lift the engine by approx. 25 mm so as not to
apply weight to the engine mount rubbers.
Make this gap even.
RGD3300H: 8 ø
RGD5000H: 10 ø
GENERATOR_GS2380.fm 37 ページ ２００７年１０月１日 月曜日 午前９時１３分