Subaru Robin RGD3300H - Manual (Page 48)

– 45 –
[Reassembling]
(1) As shown in the figure, place the white mark
on the magnet to the left and solder the
diodes so that cathode mark is to be placed
at the bottom.
(2) Solder the coil ends to the terminal.
10-2 AC VOLTAGE IS TOO HIGH OR TOO LOW.
10-2-1 CHECKING STATOR
Check stator referring to Step 10-1-1.
10-2-2 CHECKING CONDENSER
Check condenser referring to Step 10-1-2.
10-2-3 CHECKING ROTOR
Check rotor referring to Step 10-1-3.
DIODE
SURGE ABSORBER
WHITE
MARK
GENERATOR_GS2380.fm 45 ページ ２００７年１０月１日 月曜日 午前９時１３分