Ricoh Pentax КP - Manual (Page 106)

6
Se
tting
104
You can display the preview image by pressing the button
before shooting.
1
Set [Preview] to [Fx1 Button], [Fx2 Button], or
[Fx3 Button] in Step 3 of “Setting the Button
Operation” (p.102).
2
Select a preview method in
[Preview Selection] and
press E.
Proceed to Step 4 when U is selected.
3
Press B and select Y or
Z
for each display item.
4
Press F three times.
The camera returns to standby mode.
t Memo
• Optical Preview is always used in the following situations
regardless of the setting.
• When the drive mode is set to [Mirror Lock-up Shooting],
[Multi-exposure], or [Interval Shooting]
• In C mode
u Caution
• The effects of some functions cannot be checked during
Digital Preview or are not applied to the saved preview image.
Setting the Preview
U
Optical Preview
Activates the Optical Preview function
to check the depth of field with the
viewfinder.
f
Digital Preview
Activates the Digital Preview function to
check the composition, exposure, and
focus on the monitor.
Zoom Review, Save Preview Image,
Histogram Display, and Highlight Alert
are available.
Fx1 Button Fx1 Button
Preview Preview
Preview Selection Preview Selection
For checking depth of For checking depth of
field with viewfinder
field with viewfinder
Cancel Cancel OK OK
Fx1 Button Fx1 Button
Preview Preview
Zoom Review Zoom Review
Save Preview Image
Save Preview Image
Histogram Display
Histogram Display
Highlight Alert
Highlight Alert
Preview Selection Preview Selection