Ricoh Pentax КP - Manual (Page 87)

4
Pla
y
ba
ck
85
Connect to an AV device, such as a TV, equipped with an
HDMI
® terminal to display Live View images while shooting or
to play back images in playback mode.
The USB terminal (micro B) of the camera supports SlimPort
® .
Make sure to have a commercially available HDMI ® adapter
and compatible HDMI ® cable.
1
Turn the AV device and camera off.
2
Connect the HDMI ® adapter and HDMI ® cable.
3
Open the terminal cover of the camera, and
connect the HDMI
®
adapter to the USB/video
output terminal.
4
Connect the other end of the HDMI ® cable to the
input terminal on the AV device.
5
Turn the AV device and camera on.
The camera turns on in video output mode, and the camera
information is displayed on the screen of the connected AV
device.
u Caution
• While the camera is connected to an AV device, nothing is
displayed on the camera monitor. Also, you cannot adjust the
sound volume on the camera. Adjust the volume on the AV
device.
• Some HDMI ® adapters are not compatible with this camera.
Proper operation has been confirmed with the following
HDMI
®
adapter:
SP6001 (Analogix Semiconductor, Inc.)
• Do not supply power to an HDMI
®
adapter from an external
power source. This may cause the camera to malfunction.
• Images may not be output due to incompatibility with the used
HDMI
®
cable. Use an HDMI
®
cable which does not
incorporate electronic circuits.
• MHL
®
-to-HDMI
®
adapters cannot be used.
t Memo
• Check the operating manual of the AV device and select a
suitable input terminal for connecting the camera.
• By default, the maximum resolution supported by both the AV
device and camera is automatically selected. If it fails to play
back images properly, change the setting in [Video Out
Resolution] of the D3 menu.
Connecting the Camera to an AV Device