Operating the camera with a computer, Using the camera with a communication device, Enabling the wi-fi™ function – Ricoh Pentax КP User Manual
Page 95: P.93)
5
Sh
aring
93
You can perform tethered shooting with the camera connected
to a computer using the optional “IMAGE Transmitter 2”
software. Captured images can be directly saved to the
computer.
1
Set [USB Connection] to [PTP] in the D3 menu.
2
Turn the camera off.
3
Connect the camera to a computer using a USB
cable.
y
Connecting the camera to a computer (p.92)
4
Turn the camera on.
5
Start “IMAGE Transmitter 2” on the computer.
“IMAGE Transmitter 2” is started and the computer
recognizes the camera.
t
Memo
• For details on “IMAGE Transmitter 2”, refer to the “User Guide
[Operation]” available at the following site.
• During tethered shooting, the shutter release always has
priority regardless of the [AF.S Setting] setting of [AF with
Live View] in the A1 menu. (p.61)
This camera has a built-in Wi-Fi™ function. By directly connecting to
a communication device such as a smartphone and tablet via wireless
LAN, the camera can be operated from the communication device and
images can be shared with others via social networks or e-mail.
The Wi-Fi™ function is disabled when the camera is turned on.
Enable the function using one of the following methods.
• Setting from the menus (p.94)
• Using the X button (p.94)
When the Wi-Fi™ function is
enabled, a beep sounds and the 7
(white) icon indicating the wireless
LAN status is displayed on the status
screen and Live View screen. When
8
(gray) is displayed, a connection
with the communication device is not
established correctly.
t
Memo
• Even after the Wi-Fi™ function is enabled, it returns to an
inactive state when the camera is turned off and on again.
• Auto Power Off is not available while a Wi-Fi™ connection is
established or images are being transferred. If Auto Power
Off is activated while a connection is not established, the
Wi-Fi™ function is disabled. The function is enabled when the
camera recovers from Auto Power Off.
• The Wi-Fi™ function is disabled during the USB connection
or while outputting image data.
u
Caution
• Do not attempt to use the Wi-Fi™ function in a location where
the use of wireless LAN devices is restricted or prohibited,
such as on airplanes.
• When using the Wi-Fi™ function, observe local laws and
regulations governing radio communication.
• If a memory card with a built-in wireless LAN function (such
as an Eye-Fi card or a Flucard) is used, radio wave
interference may occur. When this occurs, disable the
Wi-Fi™ function of the camera.
Operating the Camera with a Computer
Using the Camera with a
Communication Device
Enabling the Wi-Fi™ Function
99999
99999