Care to be taken during handling, Care to be taken during handling ............p.137, 137 appen d ix – Ricoh Pentax КP User Manual

Page 139

Advertising
background image

7

137

Appen

d

ix

• When the camera has not been used for a long time, confirm that it is still

working properly, particularly prior to taking important pictures (such as
at a wedding or when traveling). Contents of the recording cannot be
guaranteed if recording, playback or transferring your data to a
computer, etc. is not possible due to a malfunction of your camera or
recording media (memory cards), etc.

• To keep the battery in optimum condition, avoid storing it in a fully

charged state or in high temperatures.

• If the battery is left inserted and the camera is not used for a long time,

the battery will over-discharge and shorten the battery’s life.

• Charging the battery a day before use or on the day of use is

recommended.

• The AC plug cord provided with this camera is developed exclusively for

the battery charger D-BC109. Do not use it with other devices.

• 6 Class II equipment: The provided battery charger is a Class II

(double-insulated) product.

• Do not subject the camera to high temperatures or high humidity. Do not

leave the camera in a vehicle, as the temperature can get very high.

• Do not subject the camera to strong vibrations, shocks, or pressure. Use

a cushion to protect the camera from vibrations of motorcycles,
automobiles, or ships.

• The temperature range for camera use is -10°C to 40°C (14°F to 104°F).
• The monitor may appear black at high temperatures, but will return to

normal at normal temperatures.

• The monitor may respond more slowly at low temperatures. This is due

to liquid crystal properties, and is not a malfunction.

• Sudden temperature changes will cause condensation on the inside and

outside of the camera. Place the camera in your bag or a plastic bag,
and remove it after temperatures of the camera and surroundings are
equalized.

• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salt.

These could cause the camera to breakdown. Wipe the camera to dry
off any rain or water drops immediately.

• Do not attach or remove a lens when there are any rain or water drops

on the camera. If water enters the camera or the lens, a malfunction may
occur.

• Do not press on the monitor with excessive force. This could cause it to

break or malfunction.

• Be careful not to overtighten the screw in the tripod socket when using

a tripod.

• Do not clean the camera with organic solvents such as thinner, alcohol,

and benzine.

• Use a lens brush to remove dust accumulated on a lens. Never use a

spray blower for cleaning as it may damage the lens.

• Please contact your nearest service center for professional cleaning of

the CMOS sensor. (This will involve a fee.)

• Periodic inspections are recommended every one to two years to

maintain high performance.

• Do not store the camera with preservatives or chemicals. Storage in high

temperatures and high humidity can cause mold to grow on the camera.
Remove the camera from its case and store it in a dry and well-ventilated
place.

• Avoid using or storing the camera where it may be exposed to static

electricity or electrical interference.

• Avoid using or storing the camera in direct sunlight or in locations where

it may be exposed to rapid changes in temperature or to condensation.

• The SD Memory Card is

equipped with a write-protect
switch. Setting the switch to
LOCK prevents new data from
being recorded on the card, the
stored data from being deleted,
and the card from being
formatted by the camera or a
computer.

• The SD Memory Card may be

hot when removing the card immediately after using the camera.

• Do not remove the SD Memory Card or turn off the power while the card

is being accessed. This may cause the data to be lost or the card to be
damaged.

• Do not bend the SD Memory Card or subject it to violent impact. Keep it

away from water and store away from high temperatures.

• Do not remove the SD Memory Card while formatting. The card may be

damaged and become unusable.

Care to be Taken During Handling

Before Using Your Camera

About the Battery and Charger

Precautions on Carrying and Using Your Camera

Cleaning Your Camera

Storing Your Camera

About SD Memory Cards

Write-protect

switch

Advertising