Ricoh Pentax КP - Manual (Page 18)

1
In
troduc
tion
16
You can change the type of
information displayed in standby
mode by pressing G while the
control panel is displayed. Use CD
to select the type and press E.
When shooting with the viewfinder
When shooting with Live View
t Memo
• The status screen is displayed when the camera is turned off
and on again. If [Shooting Info Display] is set to Z (On) in
[Memory] of the A5 menu, the screen selected on the
Shooting Info Display selection screen appears when the
camera is turned off and on again. (p.110)
• When [LCD Display Options] is assigned to the function dial,
you can switch the display using the Smart Function. (p.21,
p.105)
Shooting Info Display
Status
Screen Displays the settings for shooting with the
viewfinder. (p.14)
Electronic
Level
Displays the camera
angle.
A bar scale indicating
the horizontal camera
angle appears at the
center of the screen,
and a bar scale
indicating the vertical
camera angle
appears on the right side. When the angle
exceeds the range that can be displayed in each
scale, the indicator segments of the scale are
displayed in red.
Display Off Nothing is displayed on the monitor.
Electronic
Compass
Displays the current
latitude, longitude,
altitude, direction,
Coordinated Universal
Time (UTC), capture
mode, and exposure
value. Turn the
camera off and on again to return to the status
screen.
Available only when the optional GPS unit is
attached to the camera and is operating. (p.121)
102400 102400
99999 99999
Status Screen Status Screen
1/ 250 1/ 250 F5.6 F5.6 1600 1600 0.0 0.0
Example:
Tilted 1.5° to the left (yellow)
Vertically level (green)
1/ 250 1/ 250 F5.6 F5.6 1600 1600 0.0 0.0
10:00:00 10:00:00
0°
N 36°45.410' N 36°45.410'
W140°02.000' W140°02.000'
89m 89m
02/02/2017 02/02/2017
Standard
Information
Display The Live View image and the settings for
shooting with Live View are displayed.
(p.14)
Electronic
Level The same electronic level as when shooting with
the viewfinder is displayed.
No
Information
Display
Certain icons, such as those for the capture
mode and drive mode, are not displayed.