Functions when using an external flash, P.120, P.120) – Ricoh Pentax КP User Manual

Page 122: Appen d ix 120

Advertising
background image

7

Appen

d

ix

120

Use of the following external flashes (optional) enables a variety
of flash modes, such as P-TTL auto flash mode.

x

: Available #: Restricted

×

: Not available

*1

Only the R mode is available for the capture mode.

*2

Available only when using a DA, DA L, D FA, FA J, FA, F, or A lens.
(When using a lens with an aperture ring, set the aperture ring to the
9

position.)

*3

AF assist light is not available with the AF540FGZ or AF360FGZ.

*4

Shutter speed of 1/90 seconds or slower.

*5

Available with the AF201FG.

*6

Available only when combined with the AF540FGZ, AF540FGZ II,
AF360FGZ, or AF360FGZ II (two or more compatible external flashes
for Contrast Control Sync flash required).

*7

Available only when combined with the AF540FGZ, AF540FGZ II,
AF360FGZ, or AF360FGZ II.

u

Caution

• Never press 1 on the camera when any external flash unit

is attached to the camera. The built-in flash will hit the
external flash. If you want to use both at once, connect them
using an extension cord.

• Flashes with the reversed polarity (the center contact on the

hot shoe is minus) cannot be used due to the risk of damaging
the camera and flash.

• Do not combine with accessories that have a different

number of contacts, such as Hot Shoe Grip, as a malfunction
may occur.

• Combining with flashes from other manufacturers may cause

equipment breakdown.

t

Memo

• With the AF540FGZ, AF540FGZ II, AF360FGZ, or

AF360FGZ II, you can use the high-speed sync flash to
discharge a flash and take a picture at a shutter speed faster
than 1/180 seconds. Set the capture mode to I, K, or L.

• By using two or more external flashes (AF540FGZ,

AF540FGZ II, AF360FGZ, or AF360FGZ II) or by using these
external flashes in combination with the built-in flash, you can
use the wireless mode (controller flash) to shoot in P-TTL
flash mode without connecting the flash units with a cord. In
this case, set the camera channel on the external flashes.
You can check the set channel in the status screen, Live View
screen, and viewfinder. (p.14, p.19)

Functions when Using an
External Flash

Compatible Flash

Camera Function

Built-in

Flash

AF540FGZ

AF540FGZ II

AF360FGZ

AF360FGZ II

AF201FG
AF200FG

AF160FC

Red-eye reduction flash

x

x

x

Auto Flash Discharge

*1

x

x

x

Automatic switch to flash
sync speed

x

x

x

Automatic setting of the
aperture value in G or I
mode

x

x

x

P-TTL auto flash

#

*2

#

*2

#

*2

Slow-speed Sync flash

x

x

x

Flash Exposure
Compensation

x

x

x

AF assist light of the external
flash

Ч

#

*3

Ч

Trailing Curtain Sync flash

*4

x

x

#

*5

Contrast Control Sync flash

#

*6

x

#

*7

Slave flash

×

x

×

High-speed Sync flash

×

x

×

Wireless flash

#

*7

#

*7

Ч

Advertising