Ricoh Pentax КP - Manual (Page 52)

3
Shoo
ting
50
t Memo
• The settings for the exposure can be specified in increments
of 1/3 EV steps. In [1 EV Steps] of the E1 menu, you can
change the adjustment steps to 1/2 EV steps.
• In L mode, the difference from the correct exposure is
displayed on the EV bar scale while the exposure is adjusted.
• For each exposure mode (excluding M mode), you can set
the camera operation for when Q or R is turned or M
is pressed. Set in [E-Dial Programming] of [Button
Customization] in the A5 menu. (p.106)
• In I or J mode, you can take pictures while automatically
changing shutter speed and aperture value. (p.67, p.68)
u Caution
• The correct exposure may not be obtained with the selected
shutter speed and aperture value when the sensitivity is fixed
at a certain sensitivity.
When shooting with a slow shutter speed, you can reduce
image noise in [Slow Shutter Speed NR] of [Noise Reduction] in
the A2 menu.
In [Program Line] of the A1 menu, you can specify how the
exposure is controlled.
t Memo
• The Program Line setting is enabled in the following
situations.
• In G or H mode
• When GLINE is set for the M operation of K or L in [E-
Dial Programming] of [Button Customization] in the A5 menu
• When [Program Line] is assigned to the function dial, you can
change the setting using the Smart Function. (p.21, p.105)
Reducing Noise when Shooting with a
Slow Shutter Speed
A 2
Auto
Applies Noise Reduction according to the shutter
speed, sensitivity, and internal temperature of the
camera.
On
Applies Noise Reduction when the shutter speed is
slower than 1 second.
Off Does not apply Noise Reduction at any shutter speed.
Setting the Exposure Control Method A 1
A Auto Determines the appropriate settings.
B Standard
Sets to the basic program automatic
exposure (all-around mode).
C
Hi-speed
Priority
Prioritizes high shutter speeds.
D
DOF Priority
(Deep) Closes the aperture for a deep depth of
field.
E
DOF Priority
(Shallow) Opens the aperture for a shallow depth of
field.
F MTF Priority
Sets the sharpest aperture of the attached
lens when a DA, DA L, D FA, FA J, or FA
lens is used.