Ae metering, Using the built-in flash, P.57 – Ricoh Pentax КP User Manual

Page 59: P.57), Shoo ting 57

Advertising
background image

3

Shoo

ting

57

Choose the part of the sensor to use for measuring brightness
and determining the exposure in [AE Metering] of the A1 and
C

1 menus.

t

Memo

• In [5 Link AE and AF Point] of the E1 menu, the metering

point and the AF point can be linked.

• The metering method can also be set using the Smart

Function. (p.21)

1

Press C in standby mode.

2

Select a flash mode.

AE Metering

A

1/C1

A

Multi-segment

Meters the brightness in multiple
different zones of the sensor.
In backlit conditions, this mode
automatically adjusts the exposure.

B

Center-weighted

Meters the brightness with an
emphasis on the center of the sensor.
The sensitivity increases at the center
and no automatic adjustment is
performed even in backlit conditions.

C

Spot

Meters the brightness only within a
limited area at the center of the
sensor.
Useful when the subject is small. No
automatic adjustment is performed
even in backlit conditions.

Using the Built-in Flash

A

Auto Flash

Discharge

Automatically measures the ambient

light and determines whether to use

the flash.

B Auto Flash +

Red-eye

Discharges a pre-flash for red-eye

reduction before an automatic flash.

C

Flash On

Discharges a flash for each picture.

D Flash On +

Red-eye

Discharges a pre-flash for red-eye

reduction before the main flash for

each picture.

E Slow-speed

Sync

Sets to a slow shutter speed and

discharges a flash for each picture.

Use this, for example, when shooting

a portrait with the sunset in the

background.

F Slow Sync +

Red-eye

Discharges a pre-flash for red-eye

reduction before the main flash is

discharged with Slow-speed Sync.

H
G

Trailing

Curtain Sync

Discharges a flash immediately

before closing the shutter.

Sets to a slow shutter speed.

Captures moving objects as if they

are leaving a light trail behind them.

K

Manual Flash

Discharge

Sets the amount of flash discharge

between FULL and 1/128 power.

9

Wireless

(Controller)

Synchronizes with the dedicated

external flash without using a sync

cord. (p.120)

0.0

EV

0.0

EV

±0

EV

±0

EV

Flash On

Flash On

Cancel

Cancel

OK

OK

Advertising