Eaton Electrical 1000 - Manual (Page 19)

GETTING STARTED
EATON Power Xpert ® Gateway Series 1000 Card User’s Guide S 164201670 Rev 1 15
14. Verify network communication by using a Web browser (see
Figure 17). Type the IP address of the card and select Go.
15. The login prompt appears. The user name and default password is
user for read-only information and admin for configuration
(read/write) options.
The PXGX Series 1000 Card Web page opens (see Figure 17).
Enter the Card’s IP Address
Figure 17. PXGX Series 1000 Card Web Page
16. If you logged in as admin, continue to Chapter 2, “Configuring the
Card” on page 19 for additional configuration options.
NOTE Once you have logged in as admin, it is important to completely exit the browser to
set the security level back to the standard read-only level.