Eaton Electrical 1000 - Manual (Page 78)

OPERATION AND MAINTENANCE
EATON Power Xpert ® Gateway Series 1000 Card User’s Guide S 164201670 Rev 1 74
Generating Log Files
NOTE The data log and event log files are comma-separated values (*.csv) files that can
be opened in Microsoft Excel software. Some computer configurations will automatically
open the files in the Microsoft Excel software instead of prompting you to save.
To generate a data log:
1. From the card’s Web page, click the Data Log link from the menu
bar.
2. Click the Click to generate button.
3. Select a name and location for the file (if prompted to save).
To generate an event log:
1. From the card’s Web page, click the Event Log link from the menu
bar.
2. Click the Click to generate button.
3. Select a name and location for the file (if prompted to save).
Upgrading the Card’s Firmware
The card’s firmware may be updated by downloading the appropriate file
from www.eaton.com/powerxpert. During the upgrade process, the
PXGX Series 1000 Card does not monitor the PDU status.
To upgrade the firmware:
1. From the card’s Web page, click the Firmware link from the menu
bar.
2. Click the Browse button.
3. Download the pxgx_pdu_xxx.rom firmware file, available on the
Web at www.eaton.com/powerxpert.
4. After updating the firmware, the card prompts you to reboot. Click
OK to reboot the card. An audible alarm sounds as the card reboots,
and the Web page shows the “Gateway rebooting, please wait...”
message. The Web page refreshes after approximately 75 seconds.