Eaton Electrical 1000 - Manual (Page 28)

CONFIGURING THE CARD
EATON Power Xpert ® Gateway Series 1000 Card User’s Guide S 164201670 Rev 1 24
Management from an SNMP NMS
To access the PXGX Series 1000 Card via SNMP:
1. Use these default Community strings:
GET Community string: public
SET Community string: private
2. From the card’s Web page, click the Documentation link from the
menu bar (or visit www.eaton.com/powerxpert) for the following
MIB files for the PXGX Series 1000 Card:
MIB Name Filename Description
Eaton PDU MIB EATON-PDU-MIB.txt Meters available from the PDU, including
identification, input, output, configuration,
tests, alarms, bypass, traps, panel data, and
circuit breaker data
Eaton EMP MIB EATON-EMP-MIB.txt Meters and settings for the EMP
Eaton Alarms+Traps MIB EATON-PXG-MIB.txt Alarms and notifications (traps)
Eaton Object Identifier (OID)
assignments EATON-OIDS.txt Base document for all OID assignments for
Eatons MIBs
RFC 4133 Entity MIB ENTITY-MIB.txt Identification and description of each device
attached to the card
RFC 4268 Entity State MIB ENTITY-STATE-MIB.txt Five availability status meters for each
device attached to the card
RFC 4268 Entity State MIB, part 2 ENTITY-STATE-TC-MIB.txt Possible state values for the Entity State MIB
Add these files to the MIB database of your SNMP management
software (such as HP OpenView
t IBM R Director, and Sun
NetManager).
3. Use the facilities provided by the SNMP management software to
access the individual MIB objects. See Chapter 4, “MIB Files,” on
page 45 for more information.
,