Eaton Electrical 1000 - Manual (Page 31)

CONFIGURING THE CARD
EATON Power Xpert ® Gateway Series 1000 Card User’s Guide S 164201670 Rev 1 27
5. The e-mail Recipients are numbered. Select a number for a recipient.
You can select different options for each recipient (Steps 6
through 10).
After you enter and save an e-mail address, the Recipients list
updates to show the recipient number and the corresponding e-mail
address.
6. The default (True) is to send an e-mail when an event is activated
and when it clears. Select False in the appropriate Send on event...
fields to change these notification settings.
7. The default (True) is to attach an event log file, a data log file, and a
PDU identification file to the Event e-mails. (These files are always
attached to the Daily e-mails.) Select False in the appropriate
Attach... fields to remove these attachments from the Event e-mails.
8. The default (True) is to send a daily status report. Select False in the
Send periodic status field to cancel the status e-mails, or change the
number of Days between periodic status email to receive them less
frequently.
9. Specify the Time of day to send the e-mail (in 24-hour format, PXGX
Series 1000 Card time).
10. Enter the recipient’s e-mail address in the To field.
11. Click Apply to save the e-mail settings.
12. Select the next number in the Recipients pull-down menu to add
another e-mail recipient.
Repeat Steps 6 through 11 for each additional e-mail recipient.