Chapter 1 getting started, Installation checklist, Getting started – Eaton Electrical 1000 User Manual
Page 5
EATON Power Xpert
®
Gateway Series 1000 Card User’s Guide
S 164201670 Rev 1
1
Chapter 1
Getting Started
NOTE If you have completed all sections in the Power Xpert Gateway Series 1000 Card
Quick Start Instructions, proceed to Chapter 2, “Configuring the Card,” on page 19.
This section explains:
S
Checklist items needed for installation
S
Installing the card
S
Connecting the card
S
Verifying or assigning the IP address
S
Configuring the network settings
Installation Checklist
1.
Verify that all of the following items are available:
- Eaton
®
Power Xpert Gateway (PXGX) Series 1000 Card package
contents (card, configuration cable, Ethernet cable, and quick
start instructions)
- Phillips screwdriver
- Available serial port (RS-232)
- HyperTerminal
R
(ships with Microsoft
®
Windows
®
) or equivalent
terminal emulation application
- Web browser (Internet Explorer or Mozilla
®
Firefox
®
recommended)