Extreme Networks ALTITUDE 4700 - Manual (Page 13)

Altitude 4700 Series Access Point Installation Guide 13
Reset Button
The following Illustration shows the position of the reset button on the Altitude 4700
Series Access Point (the access point is shown with a T-Bar installed). The reset button
reverts the access point back to its factory default configuration.
Access Point Placement
For optimal performance, install the access point away from transformers, heavy-duty
motors, fluorescent lights, microwave ovens, refrigerators and other industrial
equipment. Signal loss can occur when metal, concrete, walls or floors block
transmission. Install the access point in an open area or add access points as needed to
improve coverage.
Antenna coverage is analogous to lighting. Users might find an area lit from far away to
be not bright enough. An area lit sharply might minimize coverage and create dark
areas. Uniform antenna placement in an area (like even placement of a light bulb)
provides even, efficient coverage.
5HVHW
%XWWRQ