Extreme Networks ALTITUDE 4700 - Manual (Page 34)

Basic 4700 Series Configuration
Altitude 4700 Series Access Point Installation Guide 34
3 Change the password.
Type the current password and a new admin password in fields provided, and click
Apply. Once the admin password has been updated, a warning message displays
stating the access point could be operating illegally unless set to operate in the
correct country. Proceed to “
Configuring “Basic” Device Settings ” on page 35 to
validate the country setting.
NOTE
Though the access point can have its basic settings defined using a number of different screens,
Extreme Networks recommends using the Quick Setup screen to define a minimum required
configuration from one location.
Resetting the Access Point’s Password
The access point has a means of restoring its password to its default value. Doing so
also reverts the access point’s security, radio and power management configuration to
their default settings. Only an installation professional should reset the access point’s
password and promptly define a new restrictive password.
To contact Extreme Networks Support in the event of a password reset requirement, go
to
https://esupport.extremenetworks.com .