Extreme Networks ALTITUDE 4700 - Manual (Page 41)

Altitude 4700 Series Access Point Installation Guide 41
a Select the Enable LAN Interface checkbox to forward data traffic over the access
point LAN connection. The LAN connection is enabled by default.
b Use the This Interface drop-down menu to specify how network address
information is defined over the LAN connection. Select DHCP Client to configure
the AP to obtain its network information from a DHCP server.
c Select DHCP Server to configure the access point to provide DHCP services over
the LAN connection.
NOTE
Extreme Networks recommends that the WAN and LAN ports should not be configured as
DHCP clients at the same time.
d If the DHCP client option is not enabled, enter the IP Address of the access point.