Rf exposure guidelines, Safety information, Reducing rf exposure-use properly – Extreme Networks ALTITUDE 4700 User Manual
Page 55: Remote and standalone antenna configurations, Power supply, Wireless devices - countries, Country selection, Reducing rf exposure—use properly
Altitude 4700 Series Access Point Installation Guide
55
RF Exposure Guidelines
Safety Information
The device complies with Internationally recognized standards covering human
exposure to electromagnetic fields from radio devices.
Reducing RF Exposure—Use Properly
Only operate the device in accordance with the instructions supplied.
Remote and Standalone Antenna Configurations
To comply with FCC RF exposure requirements, antennas that are mounted externally
at remote locations or operating near users at standalone desktop of similar
configurations must operate with a minimum separation distance of 20 cm from all
persons.
Power Supply
Use only an Extreme Networks approved power supply output rated at 48Vdc and
minimum 0.75A. The power supply shall be Listed to UL/CSA 60950-1; and certified to
IEC60950-1 and EN60950-1 with SELV outputs.
Use only an Extreme Networks approved power supply. Use of alternative power
supply will invalidate any approval given to this device and may be dangerous.
Wireless Devices - Countries
Country Selection
Select only the country in which you are using the device. Any other selection will
make the operation of this device illegal.