Extreme Networks ALTITUDE 4700 - Manual (Page 9)

Altitude 4700 Series Access Point Installation Guide 9
2 Hardware Installation
An Altitude 4700 Series Access Point installation includes mounting the access point,
connecting the access point to the network, connecting antennas and applying power.
Installation procedures vary for different environments.
Altitude 4700 Series Access Points have the following port designations:
● GE1/POE - LAN port (port-auto MDIX)
● GE2 - WAN Port (port-auto MDIX)
Precautions
Before installing an Altitude 4700 Series Access Point, verify the following:
● Do not install in wet or dusty areas without additional protection. Contact an
Extreme Networks representative for more information.
● Verify the environment has a continuous temperature range between -20° C to 50° C.
Package Contents
Check package contents for the correct model Altitude 4700 Series Access Point and
applicable Altitude 4700 Series Access Point accessories. Each available configuration (at
a minimum), contains:
● Altitude 4700 Series Access Point (accessories dependent on SKU ordered)
● Altitude 4700 Series Access Point Installation Guide (this guide)
● Wall mount screw and anchor kit
● Accessories Bag (4 rubber feet and a LED light pipe and badge with label for above
the ceiling installations)