Extreme Networks ALTITUDE 4700 User Manual
Page 36
Basic 4700 Series Configuration
Altitude 4700 Series Access Point Installation Guide
36
3
Refer to the AP-4700 System Settings field to define the following parameters:
a
Assign a System Name to define a title for this access point. The System Name is
useful if multiple devices are being administered.
b
Select the Country for the access point’s country of operation. The access point
prompts for the correct country code on the first login. A warning message also
displays stating an incorrect country setting may result in illegal radio operation.
Selecting the correct country is central to legally operating the access point. Each
country has its own regulatory restrictions concerning electromagnetic emissions
and the maximum RF signal strength that can be transmitted. To ensure
compliance with national and local laws, set the country accurately. CLI and MIB
users cannot configure their access point until a two character country code (for
example, United States - us) is set. The US version only has “US” on the country
Selection list.