Epson Multi-mode Data Controller MFJ-1278B - Manual (Page 363)

MFJ-1278B MULTI-MODE APPENDIX H COMMAND SUMMARY
Command Paramete
r Default Mode Function Page
DEADTIME nnn 33(330Ms) Packet Determines the basic time interval used by
the slotting procedure. 6-46
DELAY nn 20 (20Ms) AMTOR Sets the delay between keying the
transmitter and transmitting AMTOR. 6-46
DELETE ON|OFF off Packet Changes the input editing command. 6-47
DEFLTDLC 0-254 254 Host Sets default DLC number for Host Mode 6-47
DIDDLE ON|OFF on ASCII/ Synchronization character sent by RTTY
the MFJ-1278B each time transmitter is is
keyed in RTTY/ASCII 6-47
DIGIPEAT ON|OFF on Packet Allows your station to be used as a
digipeater. 6-48
DISCONNE -- I-command Packet Used to disconnect a connected station in
packet. 6-48
DISPLAY -- class Packet Used to list all the commands the MFJ-
1278B acknowledges. 6-49
DISPLAY -- I-command AMTOR Used to list all the commands used in
AMTOR. 6-52
DWAIT n 33 Packet Used to avoid collisions with digipeating. 6-52
EAa ON/OFF on Pactor Echos pactor transmitted data upon
reciept of remote's acknowledgement. 6-53
EAS ON|OFF off CW/RTTY/ASCII Enables real-time echoing of out-going
CW, RTTY and ASCII text. 6-53
EASIN ON/OFF off Amtor Detrermines echoing of transmitted amtor
data as you send it. 6-53
ECHO ON|OFF on All Allows the MFJ-1278B to transmit back
to you everything that you type in all
mode of operation. 6-54
ECho ON/OFF on Pactor Performs the same as the Packet ECHO
command. 6-54
EPSON ON|OFF on All Determines if you are using an
EPSON/IBM or C. ITOH printer. 6-54
ERrstrin cccc [....] Pactor Designates the character displayed when
an unconnected packet is monitored. 6-55
ERUS ON|OFF on AMTOR Inserts an underscore if the MFJ-1278B
detects an error while receiving AMTOR. 6-55
ESCAPE ON|OFF off Packet Specifies the character which will be
output when an <escape> character is to
be sent. 6-55
EXActcal ON/OFF on Pactor Determines if exact callsign matching
mode is used or not 6-56
FARNSWOR ON|OFF on CW Enables the MFJ-1278B to transmit CW
in Farnsworth method. 6-56
FAXEOP ON|OFF on FAX Determines if the user will have to
terminate the end of a FAX picture6-57 6-56
FAXMODE n 3 FAX Sets the FAX formats in FAX mode. 6-57
FAXNEG ON|OFF off FAX Causes the receiving FAX picture to print
the white areas black, and black areas 6-57