Epson Multi-mode Data Controller MFJ-1278B - Manual (Page 369)

MFJ-1278B MULTI-MODE APPENDIX H COMMAND SUMMARY
Command Paramete
r Default Mode Function Page
STREAMSW n $7C (|) Packet Selects the character used by both the
MFJ-1278B and the user to select a new
"stream". 6-118
SYSOP -- I-command Packet Enables the MAILBOX systems operator
to enter in messages to the BBS
system/bbs. 6-118
TIMEDCMD text blank M-Packet Text string in this command is executed at
a time pre-set by Timedmin command. 6-118
TIMEDMIN n 60 M-Packet Set the time for Timedcmd command. 6-119
TINV ON|OFF off AMTOR Allows the user to invert the transmitted
AMTOR signals 6-119
TRACE ON|OFF off Packet Enables the debugging protocol function. 6-120
TRace ON/OFF OFF Pactor Displays continuous debug information on
the terminal screen. 6-120
TRANS -- I-command Packet Transparent mode. 6-121
TRFLOW ON|OFF off Packet Enables and disables the software flow
control. 6-121
TRIES nn one Packet Retrieves the count of "tries" on the
currently selected input stream. 6-122
TUNE -- I-command All Keys the PTT and low tone for the current
modem for 30 seconds or until you strike
a key on your keyboard. 6-122
TUNEPROC -- I-command All Used to tune the MFJ-1278B modulator
and demodulator. 6-122
TVBREAKS n see 6-122 SSTV Sets the brightness and contrast of SSTV
picture received on the built-in printer
port. 6-123
TVHSYNC ON|OFF off SSTV Allows MFJ-1278B to look for Hsync on
dark area around the picture. 6-124
TVMODE n 1 SSTV Selects the formats under the SSTV mode. 6-124
TVX ON|OFF off SSTV Enables multi-gray levels SSTV raw data
to be sent to the terminal without any
SSTV format. 6-125
TXDELAY n 33 Packet Tells the MFJ-1278B how long to wait
after keying up the transmitter before
sending data. 6-125
TXDelay n 2 Pactor Sets time between PTT key up and actuial
data transmit. 6-126
TXDELAYC n 2 Packet Controls a new timer that runs after the
regular TXDELAY time has expired. 6-126
TXDIDDLE ON|OFF off Packet Invokes efficient key up technique in
transmitted packet to increase
throughput. 6-127
TXFLOW ON|OFF off All Enables the software flow control for the
transparent mode. 6-128
TXINVERT ON|OFF off RTTY/ASCII Inverts the mark and space on the
transmitted signals on RTTY/ASCII. 6-128