Epson Multi-mode Data Controller MFJ-1278B - Manual (Page 365)

MFJ-1278B MULTI-MODE APPENDIX H COMMAND SUMMARY
Command Paramete
r Default Mode Function Page
LFADDALT ON|OFF on RTTY Enables the MFJ-1278B to go to the next
line when a <CR> character is received in
RTTY mode. 6-67
LFIGNORE ON|OFF off Packet Line feeds are ignored except in
transparent mode. 6-68
LISTEN -- I-command AMTOR Used to monitor someone else's Mode A
AMTOR connection. 6-68
MAILbox ON/OFF off Pactor determines if Pactor Mailbox is on-line. 6-68
MAILBOX ON|OFF on Packet Enables the Packet personal mailbox. 6-69
MAILLED ON|OFF on Packet Controls the STA/MAIL LED. Flashes
when mail is presence. 6-70
MALL ON|OFF on Packet Determines the class of packets which are
monitored. 6-71
MARSMODE n 0 RTTY/ASCII Use with Promars command to set the
type of MARS QSO. 6-72
MATCH ON|OFF on AMTOR Used for selectively monitoring portions
of mode B FEC transmissions. 6-73
MAXFRAME n 4 Packet Sets the upper limit for the outstanding
packets that can occur at one time. 6-73
MAXSum nn 30 Pactor Specifies the number of cycles of error-
ladden information packets received. 6-74
MAXUp nnn 10 Pactor Specifies the number of good 100 baud
packets before a SPEEDUP is requested. 6-74
MBEGIN cccc <<>> AMTOR Allows the display of mode B
transmissions only after the reception of
the beginning of the signal. 6-74
MCOM ON|OFF off Packet Enables monitoring of connected and
disconnected packet when monitor is on. 6-75
MCON ON|OFF off Packet Allows the monitoring of other packets
while connected to another station. 6-75
MCTEXT text blank Packet Allows storing of text messages to be
stored for mailbox. Text is sent when
mailbox is connected. 6-76
MEND cccc nnnn AMTOR Used with MBEGIN and MATCH and the
mode B receiving end when the MEND
string is received 6-76.
MFILTER n1-n4 $00 M-Packet Allows you to eliminate certain characters
from received packets. 6-76
MHCLEAR -- I-command Packet Clears the MHEARD list. 6-77
MHEARD -- I-command Packet A list of all monitored packet stations. 6-77
MODE -- I-command All Selects the operation mode of the MFJ-
1278B. 6-77
MNONAX25 ON|OFF off Packet Allows MFJ-1278B to monitor non AX.25
packet. 6-78
MNONPRIN ON|OFF on Packet Determines whether monitored packets
containing non-printable characters are
monitored or discarded. 6-78