High End Systems DL.3 - Manual (Page 168)

CHAPTER 13
Effect Mode Options Descriptions
146 DL.3 Digital Light User Manual
Glow
Effect Mode parameter DMX value = 73
Glow colorizes and creates a glow on the 3-D object separate from the media texture on it. You
can apply this option to any 3-D object no matter which media file texture is applied to it. This
parameter provides an option to view a 3-D object without displaying the associated texture.
Modifier 1: Increases red color component from 0 = no adjustment to 255 (100%) =
maximum red saturation.
Modifier 2: Increases blue color component from 0 = no adjustment to 255 (100%) =
maximum blue saturation.
Modifier 3: Increases green color component from 0 = no adjustment to 255 (100%) =
maximum green saturation.
Glow Color Cycle
Effect Mode parameter DMX value = 74
Glow colorizes and creates a glow on the 3-D object separate from the media texture on it. You
can apply this option to any 3-D object no matter which media file texture is applied to it. This
parameter provides an option to view a 3-D object without an associated texture.
Modifier 1: Defines the red color component speed. A DMX value of 128 (50%) = default cycle
speed. DMX Values above the midpoint increase cycle speed in a forward direction to 255
(100%) = fastest change speed. DMX values below the midpoint increase cycle speed in a
backward direction to 0 = fastest change speed.
Modifier 2: Defines the green color component speed in the same way as Modifier 1.
Modifier 3: Defines the blue color component speed in the same way as Modifier 1.
Intensity Key
Effect Mode parameter DMX value = 45
This option turns pixels of a selected intensity transparent or applies the reverse effect.
Modifier 1: Selects intensity from a DMX value of 0 = no intensity to 255 (100%) = full
intensity.
Modifier 2: Selects intensity bandwidth from a DMX value of 0 = narrowest bandwidth to 255
= widest bandwidth.
Modifier 3: Turns selected intensity range transparent from 0 = no change to 128 = fully
transparent. DMX values above the midpoint of the range change all intensities outside of the
selected range transparent from 129 = no transparency to 255 = full reverse transparency.
Object Effect Global Effect
Object Effect Global Effect
Object Effect Global Effect