High End Systems DL.3 - Manual (Page 178)

CHAPTER 13
Effect Mode Options Descriptions
156 DL.3 Digital Light User Manual
Downward Vertical Streaks
Effect Mode parameter DMX value = 80
This option lets you convert a portion of the image into vertical streaks. You can also rotate the
angle of the streak and fade from the original image to the image with the streak option
applied.
Modifier 1: At a DMX value of 0, there is no effect. Increasing the DMX value sets the
length of the streak portion of the image from the bottom up to 255 (100%) = to the full
image converted to streaks.
Modifier 2: The default DMX value of 128 (50%) = no adjustment. Values below the midpoint
move the edge of the streaked portion of the image clockwise as you approach 0 = 90°. Values
above the midpoint move the edge of the streaked portion of the image counterclockwise as you
approach 90° at a value of 255 (100%).
Modifier 3: When Modifier 1 has a DMX value > 0, Modifier 3 lets you fade from the original
image at a DMX value = 0 to the converted image at a DMX value of 255 (100%).
Object Effect Global Effect
Original Graphic Object media file content Original Graphic Object media file content
Modifier 1 = 170, Modifier 2 = 158,
Modifier 3 = 255