High End Systems DL.3 - Manual (Page 56)

CHAPTER 3
The Digital Light Menu System
34 DL.3 Digital Light User Manual
Test Tab
Test_Home Screen
Homing sets a fixture to it’s default posi-
tioning. The fixture automatically homes
whenever it is connected to power.
You can manually home all or separate
mechanical functions by clicking on the Home
button for one of the following:
• Motion All manually homes
the entire fixture.
• Motion Pan/Tilt homes only pan and tilt
positions.
• Motion Iris/Zoom/Focus sets the Iris, Zoom and Focus to default.
Selecting the button for Calibrate Motors realigns the Pan and Tilt stepper motors after
maintenance procedures.
The fixture can also be remotely homed via a DMX controller, (see “Control Function Options”
on page 14-180) or through the Content Management Application, (see “DL.3 and DL.2
Configuration Options” on page 16-211).
Test_Self Test Screen
You can check the mechanical functionality of
Pan/Tilt, Iris, Zoom, and Focus assemblies
on the fixture head. Select On to start the test
sequence.
The Video Test option opens the mechanical
iris and provides test patterns to check the
projection functionality. This lets you verify
that the graphics engine is operating without
having to use a DMX controller.