High End Systems DL.3 - Manual (Page 183)

CHAPTER 13
Effect Mode Options Descriptions
DL.3 Digital Light User Manual 161
Modifier 1: This parameter allows you to select from three framing modes.
Modifier 2: When the Modifier 1 DMX value = 0 or 1, this channel selects from profiles that
vary in gradient density or pattern. When Modifier 1 DMX value = 2, this Modifier is not used.
Modifier 3: When Modifier 1 DMX Value = 1, this parameter determines how to use the
rendered Graphic Object content as a texture for the frame. The image below shows an
examples of
DMX
Value
Action
0
Frames the image using an Internal Frame profile to control the Global Fade Edge parameter
appearance.
1
Frames the image using an Internal Frame profile to control the Global Fade Edge parameter
appearance. Rendered Graphic Object content is selected at Frame texture using Modifier 3
parameter
2
Image clipping changing operation of the Global Image Edge Fade parameters to Emulate Framing
Shutters
Modifier 1
DMX Value
Modifier 3
DMX
value
Action
0 NA Not Used
1
0 Graphic Object 1 texture without applied Effects
1 Graphic Object 1 texture including its first applied Effect
2 Graphic Object 1 texture including its first two applied Effects
3 Graphic Object 1 texture including its first three applied Effects
10 Graphic Object 2 texture without applied Effects
11 Graphic Object 2 texture including its first applied Effect
12 Graphic Object 2 texture including its first two applied Effects
13 Graphic Object 2 texture including its first three applied Effects
20 Graphic Object 3 texture without applied Effects
21 Graphic Object 3 texture including its first applied Effect
22 Graphic Object 3 texture including its first two applied Effects
23 Graphic Object 3 texture including its first three applied Effects
2 NA Not Used