High End Systems DL.3 User Manual
Page 279
APPENDIX A
DMX Protocol
DL.3 Digital Light User Manual
257
72
51
Effect
Mode 1
Off, no effects selection
0
0
0
0
CMY simulates CMY by subtracting RGB (reduces
color values)
Mod1 = cyan, Mod2 = magenta, Mod3 = yellow
1
NA
CMY Add to All Pixels increases color values.
Mod1 = cyan, Mod2 = magenta, Mod3 = yellow
2
CMY Add to Non-black Pixels increases color
values. Mod1 = cyan, Mod2 = magenta,
Mod3 = yellow
3
RGB Add All Pixels.
Mod1 = red, Mod2 = green, Mod3 = blue
4
RGB Add 2 All Pixels.
Mod1 = red, Mod2 = green, Mod3 = blue
5
RGB Add, non-black pixels.
Mod1 = red, Mod2 = green, Mod3 = blue
6
RGB Swap to BRG
Mod1 = red, Mod2 = green, Mod3 = blue.
7
RGB Swap to GRB
Mod1 = red, Mod2 = green, Mod3 = blue.
8
Solarize 1 (if color value < DMX value, invert color)
Mod1 = red, Mod2 = green, Mod3 = blue.
9
Solarize 2 (if color value > DMX, invert color)
Mod1 = red, Mod2 = green, Mod3 = blue.
10
Solarize (if color value < DMX, set color to 0)
Mod1 = red, Mod2 = green, Mod3 = blue.
11
Solarize 4 (if color value > DMX, set color to 0)
Mod1 = red, Mod2 = green, Mod3 = blue.
12
DotP and Resample
Mod1, Mod2 and Mod3 control resampling.
13
Color Cycle (DMX value controls cycle speed)
Mod1 = red, Mod2 = green, Mod3 = blue.
14
All or Nothing (Color value greater than Mod
value, color = 255, else color = 0)
Mod1 = red, Mod2 = green, Mod3 = blue.
15
Solid Color RGB
Mod1 = red, Mod2 = green, Mod3 = blue.
16
RGB Invert
Mod1 = red to inverted red, Mod2 = green to
inverted green, Mod3 = blue to inverted blue
17
RGB Invert & Swap to GBR
Mod1 = red to inverted green, Mod2 = green to
inverted blue, Mod3 = blue to inverted red
18
RGB Invert & Swap to BRG
Mod1 = red to inverted blue, Mod2 = green to
inverted red, Mod3 = blue to inverted green
19
Edge Detect Color. Mod1=horizontal size, Mod2 =
vertical search size, Mod3=comparison threshold
20
Channel #
Function
Description
Value
Default
DL.3
DL.2
Axon
dec.
%
dec.
%