Hayes Microcomputer Products DIVA T/A ISDN - Manual (Page 101)

DIVA T/A ISDN Modem User’s Guide 101
hold and the second call is answered. You can press the receiver
button to toggle between the 2 calls.
If your phone includes Caller ID (see below), the phone will display
the number of the second incoming call (the call waiting).
Note: DIVA T/A uses a proprietary code to disable Call Waiting
(**70). You must use this code in place of the one specified by your
ISDN provider. To disable Call Waiting: Pick up the phone, wait for a
dial-tone, and then press **70. Anyone who tries to call while you’re
on a call will receive a busy signal or your VoiceMail box.
VoiceMail
VoiceMail allows you to receive voice messages when you cannot
answer a call (for example you are away from your desk, or if your
line is busy with a voice or data call). All unanswered callers will be
forwarded to your VoiceMail box, where they can leave a voice
message.
VoiceMail supports Visual Message Waiting. Visual Message
Waiting prompts you (with a flashing light or audible signal),
whenever there is a new message in your voice mail box. This feature
requires a “Class R” phone with a Message Light.
Caller ID
Caller ID lets you know who’s calling before you answer, so you can
decide how to handle the call.
Caller ID also works with Call Waiting, by displaying the number of
the second incoming call (a Type II Caller ID phone is required), and
with Call Forwarding by displaying the details of the forwarded call.
Three-Way Conference Calling
Lets you speak with up to two people at the same time so you can
accomplish more with fewer phone calls. It works as follows:
While connected to the first person, press the receiver button (this
places the first party on hold). Dial the second person’s number. After
the second person answers, press the receiver button. You and the two
other people will all be connected. If you want to drop the last party
added to the call, press the receiver button.