Hayes Microcomputer Products DIVA T/A ISDN - Manual (Page 41)

DIVA T/A ISDN Modem User’s Guide 41
7 If you have enabled AO/DI, select the X.25 tab, otherwise go to
step 8.
Configure the X.25 options you want implemented on your DIVA
T/A. Use the table below as a guideline.
Parameter Description
X.25 Version There are two X.25 CCITT recommendations
available for selection, 1984 and 1988. This
information is provided by your Service Provider
and should match the X.25 recommendation
supported on the switch you are connecting to.
Request
Reverse
Charging Determines who is charged by the X.25 network
for the call. Select No to pay for the call locally,
or select Yes to charge the remote DTE. Select
Yes only if the remote system accepts reverse
charging, otherwise the call may not be
accepted.
Throughput
class
negotiation Assigns a Throughput Class for the virtual
circuit. The throughput class specifies the
effective throughput of the virtual circuit in bits
per second (bps). Effective throughput may be
limited by a number of factors such as level of
link utilization, network congestion, and host
processing.