Hayes Microcomputer Products DIVA T/A ISDN - Manual (Page 112)

DIVA T/A ISDN Modem User’s Guide 112
4 Type following commands:
AT*Vn= 1 <ENTER>
where n is the number of the analog device.
5 Save the new settings so that they are available every time
you start the DIVA T/A. Type the following command:
AT&W n <ENTER>
where n is the number of the Profile (0, 1, or 2) to which you
want to save.
6 To restart the DIVA T/A, type:
Type ATZn <ENTER>
where n is the number of the profile number (0,1 or 2) you
want to be active.
VoiceMail is enabled but your message waiting indicator
light doesn’t go on when you have messages in your
VoiceMail box.
The DIVA T/A hardware you are using may not support the message
waiting indicator light. To check if the DIVA T/A you are using
supports this feature, follow these steps:
1 Start the terminal-emulation program (for example, Telix,
HyperTerminal, or HyperAccess).
2 Confirm you are connected to the DIVA T/A by typing AT and
pressing Enter. The DIVA T/A should respond with “OK”.
3 Type ATI20 and press Enter. The version number for your
DIVA T/A hardware (800-xxx-xx) is displayed. The message
waiting indicator light is only supported on the following
versions of the DIVA T/A hardware:
•
800-214-04 or later
•
800-145-04 or later
If your DIVA T/A hardware supports this feature and it is still not
working, check with your ISDN provider to find out if the “Message
Waiting Indicator” key is set to the appropriate value. See “Feature
Key Values” on page 102 for more information.