Hayes Microcomputer Products DIVA T/A ISDN - Manual (Page 72)

DIVA T/A ISDN Modem User’s Guide 72
Updating the DIVA T/A INF file (Windows
3.x/Windows NT 3.51)
Note: This section only applies if you are using RAS.
To update the DIVA T/A INF file:
1 Open any text editor.
2 Open the file MODEM.INF found in the Windows/System
directory for Windows 3.x or Windows\System32\RAS directory
for Windows NT 3.51, and remove all sections relating to the
DIVA T/A ISDN Modem.
3 Open the updated file WFWNTEI2.INF.
4 Copy the contents of WFWNTEI2.INF and append it to the end
of the MODEM.INF file; save the appended MODEM.INF file,
and exit your text editor.
5 (Windows NT only). From the RAS setup, remove the Eicon
DIVA T/A ISDN Modem and then restore it. Refer to RAS
online help for information on removing and adding modems.