Hayes Microcomputer Products DIVA T/A ISDN - Manual (Page 48)

DIVA T/A ISDN Modem User’s Guide 48
Parameter Description and Values
Data Over
Voice Note: Available on North American models
only.
Specifies Data Over Voice Bearer Capability as
the outgoing call type.
If voice calls are less expensive than data calls in
your tariff area, you can select this option. DOV
calls are data calls made over a BRI line using
Voice Bearer Capability.
For DOV to work, the remote device to which
you are connecting must support incoming DOV
calls.
Update Time Resets the DIVA T/A’s clock and calendar.
Click the button if you have a telephone with
call display, and receive calls with the incorrect
time or date. The DIVA T/A uses the PC clock
to update its date/time.
Tip: If you power off your DIVA T/A, click
Update Time when you turn it back on. This
ensures that the correct date and time are set.
10 Click OK or Apply to save the selections made in steps 1-9. The
Profiles window opens.
11 If you want the profile to be active when you restart the DIVA
T/A, select its name from the Active Profiles pick list. If you
want a different profile to be implemented, select it from the list.
12 Click OK to save the selection. The DIVA T/A restarts
automatically; the profile you selected in step 11 is implemented.
Your DIVA T/A is ready for use.
After the DIVA T/A has restarted, check the D LED and Link LED
on the front panel of the DIVA T/A. If the LEDs are steady, the
DIVA T/A is working correctly; if they are not steady, check your
configuration and try again. For more details on the LEDs, refer to
“LED Status Indicators on the DIVA T/A” on page 106.
For more information on using your DIVA T/A go to the section
“Using the DIVA T/A” on page 73.