Hayes Microcomputer Products DIVA T/A ISDN - Manual (Page 59)

DIVA T/A ISDN Modem User’s Guide 59
Parameter Description
ISDN Cost
Reduction
Timers
(Continued)
Billing Interval: Specifies the increments your
Service Provider uses to bill subsequent usage of
your ISDN line (usage after the initial Billing
Interval expires). For example if your Provider
charges $Y per minute for each minute
following the Initial Billing Interval, enter 60.
Note: Setting the timer to 0 disables it. The
Initial Billing Interval remains in effect.
Default: 60 seconds.
Data Over
Voice
(North
America only)
Specifies Data Over Voice Bearer Capability as
the outgoing call type.
If voice calls are less expensive than data calls in
your tariff area, you can select this option. DOV
calls are data calls made over a BRI line using
Voice Bearer Capability.
For DOV to work, the remote device to which
you are connecting must support incoming DOV
calls.
8 Click OK to close the Advanced window.
9 Click OK to close the Configuration screen.
10 If you want the profile you just configured to be active click
OK; if you want another profile to be active, select it from the
Default profile list and then click OK. The DIVA T/A restarts
automatically and implements the profile you have selected.
After the DIVA T/A has restarted, check the D LED and Link LED
on the front panel of the DIVA T/A. If the LEDs are steady, the
DIVA T/A is working correctly; if they are not steady, check your
configuration and try again. For more details on the LEDs, refer to
“LED Status Indicators on the DIVA T/A” on page 106.
You are ready to use your ISDN connection. Continue at “Using the
DIVA T/A” on page 73.